Destination-Ip - Avaya G450 Cli Reference Manual

Parameters
Parameter
rule_index
default
User Level
read-write
Context
ip access-control-list, ip qos-list, ip capture-list, ip pbr-list
Example
To enter configuration mode for ip-rule 22:
G450-001(ACL 330)# ip-rule 22
G450-001(ACL 330/ip rule 22)#
Related Commands - Packet sniffing
composite-operation, cookie,
owner, show ip
Related Commands - Policy-based routing
name, owner, show isdn bri
Related Commands - Policy
composite-operation, cookie, dscp-table, ip-fragments-in, ip-option-in, name, owner,
composite-operation,

destination-ip

Use the destination-ip command to specify the destination IP address of packets to which
the current rule applies.
Use the not form of the command to specify that the current rule applies to all packets that do
not have this destination IP address.
Use the no form of the command to set the destination IP address to
Description
Number of the rule to edit
Keyword indicating ip-rule number 10,000
(last rule in the ordered list of rules)
copy capture-file
capture-list, show upload status
link, show list
show isdn bri link,
ftp, copy capture-file
show list
Policy-based routing
Possible Default
Values Value
1-9999
scp, copy capture-file
show
.
any
Issue 1 January 2008
tftp,
771