Set Deny; Set Insert-Digits (Dial-Pattern) - Avaya G450 Cli Reference Manual

CLI Commands

set deny

Use the set deny command to permit or deny access to an outbound trunk in SLS.
Syntax
set deny {yes | no}
Note:
The default value is no (access permitted).
Note:
User Level
read-write
Context
sls > dial-pattern
Example
To prevent a station from originating an outgoing analog loop-start trunk call:
G450-001(sls-dial-pattern <dialed-string>)# set deny yes
Done!
Related Commands
clear dial-pattern, dial-pattern,
min-length, set
sls, sls

set insert-digits (dial-pattern)

Use the set insert-digits command to specify the digits to be inserted at the beginning of
the dialed string for an outbound call in SLS.
Syntax
set insert-digits digits
954 Avaya G450 CLI Reference
set delete-digits,
sls, set tgnum, set type
set insert-digits
(dial-pattern), show (dial-pattern),
SLS survivability
(dial-pattern), set max-length,
show dial-pattern,
set
show