Avaya G450 Cli Reference Manual page 1079

Note:
When you change the SNMP Engine ID, all users other than the default user are
Note:
invalidated and must be redefined.
Note:
When the IP address of the G450 changes, the SNMP Engine ID is automatically
Note:
changed.
Syntax
snmp-server engineID engineID
no snmp-server engineID
Parameters
Parameter Description
12 byte hexadecimal string, with each byte
engineID
separated by a colon. For example,
00:00:00:81:0a:fe:ff:12:97:33:45:12.
User Level
admin
Context
general
Example
To specify SNMP Engine 00:02:00:81:00:d0:00:4c:18:00 for the G450:
G450-001(super)# snmp-server engineid 00:02:00:81:00:d0:00:4c:18:00
Related Commands - SNMP access configuration
ip snmp, set snmp community,
engineID, show snmp
snmp usertogroup, show snmp
remote-user, snmp-server
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap, show
snmp-server host, snmp-server informs
set snmp retries,
group, show snmp retries,
view, snmp-server
user, snmp-server view
snmp, snmp trap link-status,
set snmp timeout,
show snmp timeout,
community, snmp-server
auth, set snmp trap enable | disable
snmp-server enable
SNMP access configuration
Possible Default
Values Value
show snmp, show snmp
show snmp user, show
group, snmp-server
frame-relay,
notifications,
Issue 1 January 2008 1079