Hostname - Avaya G450 Cli Reference Manual

Parameters
Parameter
session_id
User Level
admin
Context
general
Related Commands
clear ssh-client

hostname

Use the hostname command to change the Command Line Interface (CLI) prompt. The prompt
is written as hostname-registration, where the hostname is the value entered with the
hostname command, and registration is the media gateway registration information. If the
device is registered, the current media gateway number appears. If the device is not registered,
question marks are displayed.
Use the hostname command with no parameters to display the current prompt value. Use the
no form of this command to return the CLI prompt to the default.
Syntax
hostname [hostname_string]
no hostname
Parameters
Parameter
hostname_
string
User Level
read-write
Description
The number of the SSH session to disconnect
known-hosts, crypto key
Description
The hostname
generate, ip ssh, show ip ssh
Possible
Values
a string of up to
20 characters
SSH protocol
Possible Default
Values Value
Default
Value
G450
Issue 1 January 2008 1117