Pppoe-Client Persistent Max-Attempts - Avaya G450 Cli Reference Manual

CLI Commands

pppoe-client persistent max-attempts

Use the pppoe-client persistent max-attempts command to limit the number of
consecutive connection establishment retries. When the number is reached, the PPPoE client
stops trying to establish connections. To restart the connection attempts, use the shutdown
and no shutdown command sequence.
Use the no form of this command to restore the default value, which is that no limit is imposed
on the number of consecutive connection establishment retries. This means the PPPoE client
does not stop trying to establish connections.
Syntax
pppoe-client persistent max-attempts number
no pppoe-client persistent max-attempts
Parameters
Parameter
number
User Level
read-write
Context
interface:FastEthernet
Example
To limit the number of consecutive connection establishment retries to 0:
G450-001(super-if:FastEthernet 10/2)# pppoe-client persistent max-attempts 0
Related Commands
encapsulation
pppoe-client persistent
828 Avaya G450 CLI Reference
Description
The number of attempts
pppoe, mtu, ppp chap
delay, pppoe-client
hostname, ppp chap password,
service-name, pppoe-client wait-for-ipcp
PPPoE (PPP over Ethernet)
Possible Default
Values Value
0-10000 0 (no limit)
ppp pap sent-username,