Show Capture-Buffer Hex - Avaya G450 Cli Reference Manual

CLI Commands
Example
To display information about the currently configured packet sniffing service settings:
G450-001(super)# show capture
The sniffing service is enabled
Capturing started at:
21:22:01, February 21, 2003 / 7,9:55:55 (uptime)
stopped at: not-stopped
Buffer size: 1000 KB
Buffer mode is cyclic
Maximum number of bytes captured from
each frame: 128
Packet filter: Capture List 503
Number of frames in buffer: 200
Size of capture file: 50 KB (5%)
Related Commands
capture buffer-mode,
capture max-frame-size,
capture-list, name,

show capture-buffer hex

Use the show capture-buffer hex command to display the contents of the packet sniffing
buffer as a hex dump.
Syntax
show capture-buffer hex [frame_id]
Parameters
Parameter
frame_id
User Level
read-only
Context
general
672 Avaya G450 CLI Reference
capture buffer-size,
capture start, capture
show capture-buffer hex
Description
The ID of the first packet to display in the output
capture filter-group, capture
stop, capture-service,
Packet sniffing
interface, capture ipsec,
clear capture-buffer, ip
Possible Default
Values Value