Show Snmp Retries - Avaya G450 Cli Reference Manual

CLI Commands
Example
To display configuration information for the ReadCommG SNMP group:
G450-001(super)# show snmp group readcommg
Group Name: ReadCommG
Security Model: v1
Security Level: noauth
Read View: snmpv1View
Write View:
Notify View: snmpv1View
Related Commands - SNMP access configuration
ip snmp, set snmp
engineID, show snmp
show snmp view,
snmp-server remote-user,
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

show snmp retries

Use the show snmp retries command to display the number of retry attempts to make
when attempting to communicate with a node.
Syntax
show snmp retries
User Level
read-only
Context
general
1072 Avaya G450 CLI Reference
community, set snmp
retries, show snmp
snmp-server community,
snmp-server
show snmp, snmp trap
snmp-server informs
retries, set snmp timeout,
timeout, show snmp
snmp-server engineID,
user, snmp-server view
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP access configuration
show snmp, show snmp
user, show snmp usertogroup,
snmp-server group,
frame-relay,
notifications,