Wan Configuration, Verifying; Show Controllers - Avaya G450 Cli Reference Manual

CLI Commands

WAN configuration, verifying

show controllers

Use the show controllers command to display status information about a controller
interface.
Syntax
show controllers module/port
Parameters
Parameter
module
port
User Level
read-write
Context
general
Example
To display controller status information:
G450-001(super)# show controllers
T1 5/1 is down.
Cablelength is long gain26 0db.
Transmitter is sending remote alarm.
Receiver has loss of signal.
Framing is SF, Line Code is AMI, Clock Source is Line.
Data in current interval (802 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 802 Unavail Secs
Total Data (last 4 15 minute intervals):
10 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 3600 Unavail Secs
1280 Avaya G450 CLI Reference
Description
The module number
The port number
WAN configuration, verifying
Possible Default
Values Value