Sig-Group - Avaya G450 Cli Reference Manual

Field
Digit Handling
Japan Discon
Send Name
Send Number
Format Number
Trunk Hunt
Related Commands
add port, clear
cbc-service-feature,
set digits, set digit-handling,
set japan-disconnect,
supervision, set

sig-group

Use the sig-group command within the
administering signaling groups for SLS. After issuing this command, the prompt changes to
sls-sig-group <sgnum>
context.
Syntax
sig-group sgnum
Description
Defines how the inbound/outbound calls handle the
transmission/reception of the dialed pattern
(
enbloc-enbloc
overlap-overlap
Whether to perform a disconnect sequence (CONNECT
message followed by a DISCONNECT message)
Whether the calling, connected, called, or busy party's
administered name is sent to the network on outgoing or
incoming calls (
Whether the calling, connected, called, or busy party's
administered number is sent to the network on outgoing
or incoming calls (
The numbering plan for this trunk. The numbering plan
encodes the Numbering Plan Indicator and Type of
Number fields in the Calling/Connected Party Number IE
in the ISDN protocol (
unknownprivate
The trunk-hunting search within a facility in an ISDN trunk
group or through a non-ISDN digital trunk group (
cyclical
tac, clear trunk-group,
set channel-preference,
set digit-treatment,
set name, set numbering-format,
tac, set trunk-hunt, set
. Type exit to leave the sig-group context, and return to the
,
enbloc-overlap
)
, ,
yes no restricted
,
yes no
unknown
).
, )
descend
remove port, set cbc,
set codeset-display,
set incoming-destination,
set send-name,
sls, show sls, sls, trunk-group
sls context to enter a second-level subcontext for
SLS survivability
,
overlap-enbloc
)
, )
restricted
, ,
public private
set cbc-parameter, set
set codeset-national,
set incoming-dialtone,
set send-number,
Issue 1 January 2008
,
,
,
ascend
2 of 2
set dial,
set
sls
1011