Dscp (Policy) - Avaya G450 Cli Reference Manual

Related Commands - VPN
description (ip rule),
show ip crypto-list

dscp (policy)

Use the dscp command to specify the DSCP value that is set by the current policy operation.
Use the not form of the command to specify that the current operation set any DSCP value
other than requested value.
Use the no form of the command to specify that the current operation set the DSCP value to
.
no-change
Syntax
dscp {dscp_value | no-change}
not dscp dscp_value
no dscp
Parameters
Parameter
dscp_value
no-change
User Level
read-write
Context
ip qos-list composite-operation
Example
To specify that composite operation 17 sets the DSCP value of packets to 55:
G450-001(QoS 440/CompOp 17)# dscp 55
To specify that composite operation 17 sets the DSCP value of packets to a value other than 55:
G450-001(QoS 440/CompOp 17)# not dscp 55
ip crypto-list, ip-rule (VPN), local-address,
Description
The DSCP value
Keyword indicating that the DSCP
value is left unchanged.
Policy - QoS lists
protect crypto map, source-ip,
Possible Default
Values Value
0-63
Issue 1 January 2008 733