Avaya G450 Cli Reference Manual page 1057

Syntax
set send-name method
Parameters
Parameter Description
Specifies whether or not the calling, connected,
method
called, or busy party's administered name is sent to
the network on outgoing or incoming calls:
yes – The name is sent to the network for
●
incoming or outgoing calls
no – The name is not sent to the network for
●
incoming or outgoing calls
restricted – The name is sent to the network
●
as 'Presentation restricted'
Note: If the name is not administered for the calling,
connected, called, or busy station, the extension
number is sent in place of the name.
User Level
read-write
Context
sls > trunk-group
Example
To define that the calling, connected, called, or busy party's administered name is sent to the
network on outgoing or incoming calls:
G450-001 (sls-trunk-group-<tgnum>)# set send-name yes
Related Commands
add port, clear tac, clear
cbc-service-feature, set
set digits, set digit-handling,
set japan-disconnect,
tac, set trunk-hunt, set
trunk-group, remove
channel-preference,
set digit-treatment,
set name, set numbering-format,
sls, show (trunk-group),
port, set cbc, set cbc-parameter,
set codeset-display, set
set incoming-destination,
set send-number,
show sls, show trunk-group
SLS survivability
Possible Default
Values Value
yes no
no
restricted
set
codeset-national, set
set incoming-dialtone,
set supervision,
sls, trunk-group
Issue 1 January 2008
dial,
set
1057