Set Trunk-Destination - Avaya G450 Cli Reference Manual

CLI Commands
Example
To enable SLS to recognize the switchhook flash signal and to provide subsequent transfer
service:
G450-001 (sls-station <extension>)# set swhook-flash yes
Related Commands
set cor, set expansion-module,
set type (station),

set trunk-destination

Use the set trunk-destination command to administer a station extension to be included
in a pool of stations that can receive incoming analog loop-start trunk calls in circular queueing
in SLS.
Note:
This command does not apply to analog DID trunks.
Note:
Syntax
set trunk-destination {yes | no}
Parameters
Parameter
yes
no
User Level
read-write
Context
sls > station
1028 Avaya G450 CLI Reference
set name,
show (station), show sls, station,
Description
Keyword indicating that this extension can
receive incoming analog loop-start trunk calls
as part of the station pool which is available in
a circular queueing fashion across the first
available idle station.
This is the default.
Keyword indicating that this extension cannot
receive incoming analog loop-start trunk calls
as part of the station pool which is available
set password, set port,
sls
SLS survivability
set sls, set trunk-destination,
Possible Default
Values Value