Rtcp; Set Qos Rtcp - Avaya G450 Cli Reference Manual

CLI Commands
RSVP PARAMETERS
--------------------
State
Retry on Failure
Retry Delay(secs)
Service Profile
RTCP MON PARAMETERS
--------------------
State
IP Address
Listening Port
Report Period(secs):
Related Commands - RSVP
set qos rsvp
Related Commands - RTCP

set qos rtcp

RTCP

set qos rtcp
Use the set qos rtcp command to permit the setup of RTCP parameters. The parameters
that can be set are enabling or disabling RTCP reporting capability, setting the IP address of the
monitor, setting the reporting period, and defining the listening port number.
Syntax
set qos rtcp {{enable|disable} | monip ip-address | reportper seconds |
listenport portno}
898 Avaya G450 CLI Reference
LOCALLY SET
---------------
: Enabled
: Yes
: 15
: Guaranteed
LOCALLY SET
---------------
: Enabled
: 0.0.0.0
: 5005
5
DOWNLOADED
---------------
Disabled
Yes
15
Guaranteed
DOWNLOADED
---------------
Disabled
0.0.0.0
5005
5
RTCP