Source-Ip - Avaya G450 Cli Reference Manual

CLI Commands
Dos classification: fraggle
345 Any
Any
Dos classification: ip-spoofing
Deflt Any
Any
Related Commands - Policy-based routing: ip pbr-list
destination-ip,
routing), show ip next-hop-list
Related Commands - Policy-based routing: ip pbr-list: ip-rule
ip-rule (policy, policy-based routing, packet
Related Commands - Policy
composite-operation, cookie, dscp-table, ip-fragments-in, ip-option-in,
policy-based routing, packet
dscp-table, show isdn bri
icmp, source-ip,
source-port
Related Commands - DoS
DoS-classification,

source-ip

Use the source-ip command to indicate that the current rule applies to packets from the
specified source IP address.
Use the no form of the command to indicate that the current rule applies to packets from any IP
address.
Use the not form of the command to indicate that the current rule applies to all packets except
those coming from the specified IP address.
Syntax
[not] source-ip {host ip_address | any | ip_address wildcard}
no source-ip
780 Avaya G450 CLI Reference
Src 3.3.3.3
Dst Any
Src Any
Dst Any
dscp (policy-based routing, packet sniffing,
sniffing), name, owner,
link, show list, composite-operation, destination-ip,
tcp destination-port,
show ip access-control-list
Host
VPN),
sniffing), name, owner,
show composite-operation,
tcp established, tcp source-port,
Policy-based routing
Any Permit
Any No
Any Permit
Any No
next-hop (policy-based
show list
ip-rule (policy,
show
dscp (policy),
udp destination-port, udp