Show Rtp-Stat Sessions - Avaya G450 Cli Reference Manual

CP 46, L2Pri 12, RTCP 37
Transmitted-RTP:
VLAN 1, DSCP 184, L2Pri 6, RTCP 43
Remote-Statistics:
Loss 0.0% #0, Avg-Loss 0.0%, Jitter 0mS #0, Avg-Jitter 0mS
Echo-Cancellation:
Loss 45dB #1, Len 32mS
RSVP:
Status Disabled, Failures 0
Note:
For an explanation of the output fields, see the table describing the output of the
Note:
show rtp-stat detailed command in the chapter Configuring monitoring
applications, in Administration for the Avaya G450 Media Gateway, 03-602055.
Related Commands
rtp-stat clear, rtp-stat
rtp-stat qos-trap-rate-limit, rtp-stat-service,
sessions, show rtp-stat

show rtp-stat sessions

Use the show rtp-stat sessions command to display a summary of the active and/or
terminated RTP sessions in the session table. If no parameters are specified, a summary of all
RTP session information is displayed.
Syntax
show rtp-stat sessions [active|active-events|history|events]
[destination-ip {remote-subnet remote-subnet-mask}|{host rem-addr}]
[last last-N]
Parameters
Parameter
active
active-events
history
event-threshold, rtp-stat
rtp-stat
summary, show rtp-stat
Description
Keyword specifying to display only active
sessions
Keyword specifying to display only active
sessions experiencing bad QoS conditions
Keyword specifying to display only
terminated sessions
fault, rtp-stat min-stat-win,
threshold, show rtp-stat
thresholds, show rtp-stat traceroute
RTP statistics
rtp-stat qos-trap,
config, show rtp-stat
Possible Default
Values Value
Issue 1 January 2008 913