Set Protocol-Version - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - Trunk-group commands
add port, clear
set codeset-national,
incoming-destination,
send-name, set
(trunk-group),
Related Commands - DS1 commands
clear ds1, set
country-protocol,
set side, set signaling-mode,
Related Commands - BRI commands
bri, clear bri, set
directory-number-b,
set side, set spid-a,
Related Commands - SLS commands
set sls, show sls,

set protocol-version

Use the set protocol-version command for countries whose public networks allow for
multiple ISDN Layer-3 country protocols for ISDN Primary Rate service in SLS.
Note:
This command is only valid for a DS1 circuit employed with ISDN.
Note:
Syntax
set protocol-version option
974 Avaya G450 CLI Reference
tac, clear trunk-group,
set dial, set digits,
set incoming-dialtone,
send-number, set supervision,
trunk-group
bearer-capability, set
set interface, set interface-companding,
show (ds1),
bearer-capability, set
set endpoint-init,
set spid-b, set tei-assignment,
sls
remove port, set channel-preference,
set digit-handling,
set japan-disconnect,
set tac, set
bit-rate, set channel-numbering,
show ds1
country-protocol, set
set interface, set interface-companding,
show bri,
SLS survivability
set codeset-display,
set digit-treatment, set
set numbering-format,
trunk-hunt, show trunk-group,
set connect,
set long-timer, set protocol-version,
directory-number-a,
set
show (bri)
set
show
set
set
layer1-stable,