Show Snmp - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - SNMP access configuration
ip snmp, set snmp
engineID,

show snmp

snmp usertogroup,
snmp-server group,
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show snmp, snmp trap
snmp-server informs
show snmp
Use the show snmp command to display SNMP configuration information.
Syntax
show snmp
User Level
read-only
Context
general
Example
To display SNMP configuration information:
G450-001(super)# show snmp
Community-Access
read-only
read-write
trap
Trap-Rec-Addr
SNMPv3 Notifications Status
Traps: Disabled
Informs: Disabled
1090 Avaya G450 CLI Reference
community, set snmp
group, show snmp
show snmp view, snmp-server
snmp-server remote-user,
link-status, snmp-server enable
Community-String
public
private
secret
Status
Retries: 3
retries, set snmp timeout,
retries, show snmp timeout,
community,
snmp-server user,
auth, set snmp trap enable | disable
notifications,
Traps configured
Timeout: 3 seconds
SNMP trap configuration
show snmp, show snmp
show snmp user,
snmp-server engineID,
snmp-server view
frame-relay,
snmp-server host,
show