Set Digit-Treatment - Avaya G450 Cli Reference Manual

CLI Commands

set digit-treatment

Use the set digit-treatment command to define the incoming digit treatment for analog
DID trunks or for DS1 TIE trunks using in-band signaling in SLS.
Syntax
set digit-treatment digit-treat
Parameters
Parameter
digit-treat
User Level
read-write
Context
sls > trunk-group
Examples
To define the incoming digit treatment as absorb 1:
G450-001 (sls-trunk-group-<tgnum>)# set digit-treatment absorb 1
To remove incoming digit treatment:
G450-001 (sls-trunk-group-<tgnum>)# set digit-treatment blank
Related Commands
add port, clear
cbc-service-feature,
set digits, set digit-handling,
japan-disconnect,
supervision, set
1050 Avaya G450 CLI Reference
Description
The incoming digit treatment for
analog DID trunks only
tac, clear trunk-group,
set channel-preference,
set incoming-destination,
set name, set numbering-format,
tac, set trunk-hunt, set
remove port, set cbc,
set codeset-display,
set incoming-dialtone,
set send-name,
sls, show sls, show trunk-group
SLS survivability
Possible Values
blank (removes digit
treatment),
absorb1
absorb2
absorb3
absorb4
absorb5
insert1
insert2
insert3
insert4
set cbc-parameter, set
set codeset-national,
set
set send-number,
sls, trunk-group
Default
Value
blank
set dial,
set