Set Long-Timer - Avaya G450 Cli Reference Manual

CLI Commands

set long-timer

Use the set long-timer command to increase the duration of the T303 (call establishment)
timer in SLS.
Syntax
set long-timer {yes | no}
Parameters
Parameter
yes
no
User Level
read-write
Context
sls > ds1
Example
To extend the T303 timer to 13 seconds:
G450-001 (sls-ds1-<port address>)# set long-timer yes
Related Commands
clear ds1, set
country-protocol,
side, set signaling-mode,
972 Avaya G450 CLI Reference
Description
Keyword specifying to extend the T303
timer from 4 seconds to 13 seconds
Keyword specifying that the T303 timer
remain at 4 seconds. This is the
default.
bearer-capability, set
set interface, set interface-companding,
set sls, show
bit-rate, set channel-numbering,
(ds1), show ds1, show
SLS survivability
Possible Default
values value
set connect,
set name, set protocol-version,
sls, sls
set
set