Interface Vlan - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
clear port static-vlan, icc-vlan,
vlan-binding-mode,
trunk, show vlan

interface vlan

Use the interface vlan command to enter interface VLAN configuration mode. Use the no
form of this command to delete the interface.
If the specified interface does not exist, the system creates it and enters its configuration mode.
Syntax
[no] interface vlan vlan_id[.ip_interface]
Parameters
Parameter
vlan_id
ip_interface
User Level
read-write
Context
general
Example
To create VLAN 2 and enter its configuration context:
G450-001(super)# interface Vlan 2
To create a sub interface 1 on VLAN 2:
G450-001(if:Vlan 2)# interface Vlan 2.1
1182 Avaya G450 CLI Reference
interface vlan,
set trunk, set vlan, show cam
Description
The VLAN ID number of this interface
The IP sub-interface number within this
interface. A number of IP interfaces may be
bound to a Layer 3 interface.
set port static-vlan, set port
vlan, show port vlan-binding-mode,
VLAN configuration
vlan, set port
show
Possible Default
Values Value
1-4090
0-1024