Pre-Shared-Key - Avaya G450 Cli Reference Manual

no keepalive-track
Parameters
Parameter
track-id
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3) FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3), Loopback (L2,
L2-L3), Dialer (L2, L2-L3)
crypto isakmp peer
Example
To register a remote VPN peer with object tracker 5:
G450-001(config-peer:149.49.70.1)# keepalive-track 5
To register the FastEthernet interface with object tracker 2:
G450-001(config-if:FastEthernet 10/2)# keepalive-track 2
Related Commands - VPN
description (ISAKMP
mode, isakmp-policy,
crypto isakmp

pre-shared-key

Use the pre-shared-key command to configure the IKE pre-shared key. Use the no form of
the command to delete the IKE pre-shared key.
Tip:
You can use the command
Tip:
Syntax
[no] pre-shared-key psk-str [hexadecimal]
Description
The ID of the object tracker
peer), continuous-channel,
keepalive (VPN), pre-shared-key, self-identity,
peer, suggest-key
suggest-key
Possible
Values
1-100
crypto isakmp
to generate a key.
Issue 1 January 2008
VPN
Default
Value
peer, initiate
show
1221