Avaya G450 Cli Reference Manual page 1087

Parameters
Parameter Description
Number of the module
module
Number of the port on the module.
port
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
Keyword specifying to enable uplink/
enable
downlink traps
Keyword specifying to disable uplink/
disable
downlink traps
User Level
read-write
Context
general
Example
To enable uplink and downlink traps for port 6/5 on the G450:
G450-001(super)# set port trap 6/5 enable
Port 6/5 up/down trap enabled.
Related Commands - SNMP access configuration
ip snmp, set snmp community,
engineID, show snmp
snmp usertogroup, show snmp
snmp-server group, snmp-server
Related Commands - SNMP trap configuration
set snmp trap enable | disable
show snmp, snmp trap
snmp-server informs
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager
set snmp retries,
group, show snmp retries,
view, snmp-server
remote-user,
auth, set snmp trap enable | disable
link-status, snmp-server enable
Possible
Values
set snmp timeout, show
show snmp timeout,
community, snmp-server
snmp-server user, snmp-server view
frame-relay,
notifications,
Issue 1 January 2008
SNMP trap configuration
Default
Value
snmp, show snmp
show snmp user, show
engineID,
show port
snmp-server host,
trap,
1087