Ip Qos-List - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
policy_list
direction
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3, PPP L3),
VLAN (L2, L2-L3), Loopback (L2, L2-L3), Tunnel (L2, L2-L3), Dialer (L2, L2-L3)
Example
To apply QoS list 440 to all incoming packets on the Vlan 1 interface:
G450-001(if:Vlan 1)# ip qos-group 440 in
Related Commands
ip access-control-list,
pre-classification,

ip qos-list

Use the ip qos-list command to enter configuration mode for the specified QoS list. If the
QoS list does not exist, the system creates it and enters its configuration mode.
Syntax
ip qos-list list_number
Parameters
Parameter
list_number
718 Avaya G450 CLI Reference
Description
The policy list number
The direction of packets to which the
policy applies
ip access-group, ip
show ip access-control-list,
Description
The policy list number
policy-list-copy, ip qos-list,
show ip qos-list
Policy - QoS lists
Possible Default
Values Value
400-499 400
in, out
ip simulate,
Possible Default
Values Value
400-499 400