Avaya G450 Cli Reference Manual page 785

Parameter Description
Keyword that specifies to apply the rule to a port
gt
whose name or number is greater than the
specified name or number
The name of the port for which to apply the rule
port_name
The number of the port for which to apply the rule
port_number
Keyword indicating that a range of ports is
range
specified
The start of a port range for which to apply the rule
start_port
The end of a port range for which to apply the rule
end_port
User Level
read-write
Context
ip pbr-list ip-rule, ip capture-list ip-rule, ip qos-list ip-rule, ip access-control-list ip-rule, ip
crypto-list ip-rule
Note:
The not form of the command is not relevant in the crypto-list ip-rule context.
Note:
Example
To specify that rule 22 applies to all packets whose source port is greater than port number 95:
G450-001(ACL 330/ip rule 22)# tcp source-port gt 95
To specify that rule 22 applies to all packets whose source port is less than or equal to port 95:
G450-001(ACL 330/ip rule 22)# not tcp source-port gt 95
Related Commands - Policy-based routing
destination-ip, dscp (policy-based routing, packet sniffing,
capture-list, source-ip,
Related Commands - Policy
composite-operation, destination-ip,
dscp-table, show isdn bri
destination-port, udp source-port
tcp destination-port, udp
dscp (policy), icmp,
link, source-ip, tcp
VPN), icmp, ip-protocol,
destination-port, udp source-port
show composite-operation,
destination-port, tcp established,
Policy-based routing
Possible Default
Values Value
show ip
show
udp
Issue 1 January 2008 785