Mode - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
crypto map, crypto isakmp
crypto-group, ip
transform-set

mode

Use the mode command to set the IPSec encapsulation mode. Use the no form of the
command to return the value to the default encapsulation mode, which is tunnel mode.
Note:
Transport mode cannot be used unless the remote VPN peer supports Transport
Note:
mode and is configured to use it.
Syntax
[no] mode {tunnel | transport}
Parameters
Parameter
tunnel
transport
User Level
read-write
Context
crypto ipsec transform-set
Example
To set the IPSec encapsulation mode to tunnel:
G450-001(config-transform:ts1)# mode tunnel
1210 Avaya G450 CLI Reference
peer, crypto isakmp
crypto-list, mode, set
Description
Keyword specifying the IPSec VPN tunnel
mode. This is the default setting.
Keyword specifying the IPSec VPN
transport mode.
Note: Specify this mode only for a GRE
tunnel.
peer-group,
pfs, set security-association
crypto isakmp policy,
lifetime, show crypto ipsec
Possible Default
Values Value
VPN
ip