CLI Commands
Output fields
Name
Rcvd
Sent
Connect
Related Commands
clear ip rtp
header-compression,
compression-connections,
non-tcp-mode,
show ip rtp
header-compression,
show ip tcp header-compression brief
Use the show ip tcp header-compression brief command to display a subset of TCP
header compression statistics for a specific interface. If no interface is specified, it shows TCP
header compression statistics for all interfaces.
Syntax
show ip tcp header-compression brief [interface_name]
1178 Avaya G450 CLI Reference
Description
Information on received TCP packets, as follows:
Full Headers — the number of TCP packets with full headers
●
received
Compressed — the number of TCP packets with compressed
●
headers received
Errors — the number of packets discarded during
●
de-compression due to errors
Information on sent TCP packets, as follows:
Full Headers — the number of TCP packets with full headers
●
sent
Compressed — the number of TCP packets with compressed
●
headers sent
Bytes Saved — the total saving in bytes due to compression
●
Bytes Sent — the total number of bytes sent after
●
compression
Efficiency Improvement Factor — the improvement factor,
●
calculated as (bytes saved + bytes sent)/ bytes sent (rounded
to two decimal places)
Connection information, as follows:
Active/Inactive — whether TCP header compression is
●
negotiated and working on this interface
Rx Slots — the number of TCP sessions to decompress
●
Tx Slots — the number of TCP sessions to compress
●
clear ip tcp
ip rtp
header-compression,
ip rtp
port-range,
ip tcp
show ip rtp header-compression brief
header-compression,
ip rtp
compression-connections,
Van Jacobson header compression
ip rtp
max-period,
ip rtp
max-time,
ip tcp
header-compression,
ip rtp