Dscp (Policy) - Avaya G450 Cli Reference Manual

Related Commands - Policy
composite-operation,
isdn bri link, source-ip,
destination-port,
Related Commands - VPN
description (ip rule),
show ip crypto-list

dscp (policy)

Use the dscp command to specify the DSCP value that is set by the current policy operation.
Use the not form of the command to specify that the current operation set any DSCP value
other than requested value.
Use the no form of the command to specify that the current operation set the DSCP value to
.
no-change
Syntax
dscp {dscp_value | no-change}
not dscp dscp_value
no dscp
Parameters
Parameter
dscp_value
no-change
User Level
read-write
Context
ip qos-list composite-operation
dscp (policy), show
tcp destination-port,
udp source-port
ip crypto-list, ip-rule
Description
The DSCP value
Keyword indicating that the DSCP
value is left unchanged
dscp-table, icmp, show
tcp established, tcp
(VPN), local-address,
Policy - access control lists
composite-operation,
source-port, udp
protect crypto map, source-ip,
Possible Default
Values Value
0-63
Issue 1 January 2008
show
687