Router Rip - Avaya G450 Cli Reference Manual

CLI Commands
Syntax
[no] ip rip split-horizon
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3,
L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Related Commands
ip distribution access-list,
default-route-mode,
show ip protocols

router rip

Use the router rip command to enable the RIP and to enter the router configuration context.
Use the no form of this command to restore the default value, and disable RIP.
Syntax
[no] router rip
User Level
read-write
Context
general
Example
To enable RIP and enter the router configuration context:
G450-001(super)# router rip
G450-001(super router:rip)#
Related Commands
ip distribution access-list,
default-route-mode,
split-horizon, show ip protocols
864 Avaya G450 CLI Reference
ip rip authentication
ip rip poison-reverse,
ip rip authentication
ip rip poison-reverse,
key, ip rip authentication
ip rip rip-version, ip rip
key, ip rip authentication
ip rip rip-version, ip rip
mode, ip rip
send-receive-mode, router
mode, ip rip
send-receive-mode, ip rip
RIP
rip,