Show Snmp Group - Avaya G450 Cli Reference Manual

Example
To display the SNMP engine ID:
G450-001(super)# show snmp engineid
EngineId: 00:00:00:09:00:d0:00:4c:18:00
Engine Boots: 1234455
Related Commands - SNMP access configuration
ip snmp, set snmp
group, show snmp
snmp view, snmp-server
remote-user, snmp-server
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

show snmp group

Use the show snmp group command to display configuration information about the SNMP
groups or about a specified SNMP group.
Syntax
show snmp group [group-name]
User Level
admin
Context
general
Parameters
Parameter
group-name
community, set snmp
retries, show snmp
community,
user, snmp-server view
show snmp, snmp trap
snmp-server informs
Description
The name of a specific SNMP group
retries, set snmp timeout,
timeout, show snmp user,
snmp-server engineID,
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP access configuration
show snmp, show snmp
show snmp usertogroup,
snmp-server group, snmp-server
frame-relay,
notifications,
Possible Default
Values Value
Issue 1 January 2008
show
1071