Set Channel-Preference - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
add port, clear
channel-preference,
digit-handling,
japan-disconnect,
supervision, set
trunk-group

set channel-preference

Use the set channel-preference command to define how the Channel Identification IE
field is encoded in SLS.
Note:
This command only applies to ISDN trunks.
Note:
Syntax
set channel-preference type
Parameters
Parameter
type
User Level
read-write
Context
sls > trunk-group
Example
To define that the Channel Identification IE field is encoded to preferred status:
G450-001 (sls-trunk-group-<tgnum>)# set channel-preference preferred
1044 Avaya G450 CLI Reference
tac, clear trunk-group,
set codeset-display,
set digit-treatment, set
set name, set numbering-format,
tac, set trunk-hunt, set
Description
Encoding of the Channel Identification IE field:
exclusive – The central office must have the
●
ability to grant a call on this channel or reject
the call attempt
preferred – The central office might offer the
●
call request on another available channel
remove port, set cbc,
set codeset-national,
incoming-destination,
set send-name,
sls, show (trunk-group),
SLS survivability
set cbc-parameter, set
set dial, set digits,
set incoming-dialtone,
set send-number,
show sls, show trunk-group
Possible
Values
exclusive
preferred
set
set
set
sls,
Default
Value
preferred