Show Ip-Rule - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - Policy
composite-operation, cookie, dscp-table, ip-fragments-in, ip-option-in,
policy-based routing, packet
show list

show ip-rule

Use the show ip-rule command to display the attributes of a specific rule. Leave the
rule_number parameter blank to display all rules.
Syntax
show ip-rule [rule_number]
Parameters
Parameter
rule_number
User Level
read-write
Context
ip access-control-list, ip access-control-list/ip-rule, ip qos-list, ip qos-list/ip-rule, ip capture-list,
ip capture-list/ip-rule, ip pbr-list, ip pbr-list/ip-rule
Example
To display information about ip rule 22 in access-control-list 320:
G450-001(ACL 320/ip rule 22)# show ip-rule 22
I.D. Protocol IP
----- -------- --- ---------------- --------- ----------
22 Ip
792 Avaya G450 CLI Reference
sniffing), name,
Description
The specific rule for which attributes are
displayed
Wildcard
Src
Dst
show composite-operation,
Port Operation
Any permit
Any
Policy-based routing
ip-rule (policy,
show isdn bri link,
Possible Default
Values Value