Show Frame-Relay Lmi - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
clear frame-relay
fragment, show frame-relay pvc

show frame-relay lmi

Use the show frame-relay lmi command to display LMI statistics for a particular interface
or for all interfaces. The output displayed differs depending on the type of interface.
Syntax
show frame-relay lmi [interface interface_name]
Parameters
Parameter
interface_ name
User Level
read-only
Context
general
Example
To display LMI statistics for all interfaces:
G450-001(super)# show frame-relay lmi
LMI Statistics for interface Serial 1 (Frame Relay DTE)
LMI TYPE = ANSI Annex D Invalid Unnumbered info
0 Invalid dummy Call Ref
Status Message
Information ID
Request
0, Num Status msgs Rcvd
Status Timeouts
LMI Statistics for interface Serial 2 (Frame Relay DTE)
LMI TYPE = Auto Detect Mode
Disc
0 Invalid Status Message
Information ID
Request
1282 Avaya G450 CLI Reference
counters, frame-relay
brief, show interfaces
Description
The name of the interface
0, Invalid Lock Shift
0, Invalid Report IE Len
0, Invalid Keep IE Len
0
Invalid Unnumbered info
0 Invalid dummy Call Ref
0, Invalid Report IE Len
0, Invalid Keep IE Len
class-dlci, interface serial,
0,
0, Invalid Msg Type
0 Num Status Enq. Sent
0 Num Update Status Rcvd
0,
0, Invalid Lock Shift
0 Num Status Enq. Sent
WAN configuration, verifying
map-class frame-relay,
Possible Default
Values Value
Invalid Prot Disc
0
0 Invalid
0 Invalid Report
0,
0, Invalid Prot
Invalid Msg Type
0
0 Invalid Report
Invalid
Num
Invalid