Icmp - Avaya G450 Cli Reference Manual

Related Commands - VPN
description (ip rule), destination-ip,
crypto-list, ip-protocol,
crypto-list, tcp destination-port,

icmp

Use the icmp command to specify that the current rule applies to a specific type of ICMP
packet.
Use the not form of this command to specify that the rule applies to all packets except those of
the requested ICMP attribute. If the IP protocol is not ICMP, it is set to ICMP.
Use the no form of the command to specify that the current rule applies to any type of ICMP
packet.
Note:
The icmp command also sets the IP protocol to ICMP.
Note:
Syntax
[not] icmp {name | {icmp_type icmp_code}}
no icmp
Parameters
Parameter
name
icmp_type
icmp_code
User Level
read-write
Context
ip capture-list/ip-rule, ip access-control-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule, ip
crypto-list ip-rule
dscp (policy-based routing, packet sniffing,
ip-rule (VPN), local-address,
tcp source-port,
Description
Specify that the rule
applies to this ICMP name
Specify that the rule
applies to this icmp type
Specify that the rule
applies to this icmp code
protect crypto map, source-ip,
udp destination-port, udp source-port
Possible Values
For an ip-rule: 0-256
For a QoS rule: 0-65535
For an ip-rule: 0-256
For a QoS rule: 0-65535
Issue 1 January 2008
Policy - QoS lists
VPN), icmp, ip
show ip
Default
Value
735