Capture-Service - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
general
Examples
If the packet sniffing service has been enabled by the administrator:
G450-001(super)# capture stop
110 packets captured.
If the packet sniffing service has not been enabled by the administrator:
G450-001(super)# capture stop
The Packet sniffing process is not running.
Related Commands
capture buffer-mode,
capture max-frame-size,
name, show capture,

capture-service

Use the capture-service command to enable the packet sniffing service. Use the no form of
the command to disable the packet sniffing service. By disabling the service, the administrator
can prevent users with read-write access from starting packet sniffing.
Note:
This command can only be executed by an admin user connected via the
Note:
Console port.
Syntax
[no] capture-service
User Level
admin
Context
general
642 Avaya G450 CLI Reference
capture buffer-size, capture
capture start, capture-service,
show capture-buffer hex
filter-group, capture interface,
clear capture-buffer,
Packet sniffing
capture ipsec,
ip capture-list,