Avaya G450 Cli Reference Manual page 1024

CLI Commands
Parameters
Parameter
name
User Level
read-write
Context
sls > station
sls > trunk-group
sls > ds1
sls > bri
Examples
To set the username Joe Smith for a given station:
G450-001 (sls-station-<extension>)# set name "Joe Smith"
Related Commands - Station commands
set cor, set expansion-module,
set type (station),
Related Commands - Trunk-group commands
add port, clear
set codeset-national,
incoming-destination,
send-name, set
(trunk-group),
Related Commands - DS1 commands
clear ds1, set
country-protocol,
set side, set signaling-mode,
1024 Avaya G450 CLI Reference
Description
The name as specified on the corresponding
Communication Manager form (add
trunk-group n). This name is typically used to
identify an individual, a service provider, or a site.
If the file name includes spaces, use quotes.
The length of the name is:
DS1 and BRI: 1 -15 characters
●
station and trunk-group: 1-27 characters
●
set password,
show (station), station
tac, clear trunk-group,
set dial, set digits,
set incoming-dialtone,
send-number, set supervision,
trunk-group
bearer-capability, set
set interface, set interface-companding,
show (ds1),
set port, set
remove port, set channel-preference,
set digit-handling,
set japan-disconnect,
set tac, set
bit-rate, set channel-numbering,
show ds1
SLS survivability
Possible
Values
swhook-flash, set trunk-destination,
set codeset-display,
set digit-treatment, set
set numbering-format,
trunk-hunt, show trunk-group,
set connect,
set long-timer, set protocol-version,
Default
Value
set
show
set