Wan Ethernet Port Configuration; Interface Fastethernet - Avaya G450 Cli Reference Manual

WAN Ethernet port configuration

interface FastEthernet

Use the interface FastEthernet command to enter Interface FastEthernet configuration
mode. Use the no form of this command to delete an IP interface.
If the specified interface does not exist, the system creates it and enters its configuration mode.
Syntax
[no] interface FastEthernet [module/port[.ip_interface]]
Parameters
Parameter
module
port
ip_interface
User Level
read-write
Context
general
Example
To create a FastEthernet interface and enter its context:
G450-001(super)# interface FastEthernet 10/2
To create a Level 3 sub-interface on the FastEthernet interface:
G450-001(super)# interface FastEthernet 10/2.1
Description
The module number of the interface
The port number of the interface
The IP sub-interface number within this
interface. A number of IP interfaces may
be bound to a Layer 3 interface.
WAN Ethernet port configuration
Possible Default
Values Value
10
3
0-1024
Issue 1 January 2008 1291