Copy Capture-File Tftp - Avaya G450 Cli Reference Manual

CLI Commands

copy capture-file tftp

Use the copy capture-file tftp command to upload the packet sniffing buffer to a file
using the tftp protocol.
Note:
You must stop the packet sniffing service using the capture stop command
Note:
before you can upload the buffer.
Syntax
copy capture-file tftp filename ip
Parameters
Parameter
filename
ip
User Level
read-write
Context
general
Example
To upload the packet sniffing buffer to
135.64.10.33:
G450-001(super)# copy capture-file tftp g450.cap 135.64.10.33
Related Commands
composite-operation, cookie,
announcement-file
capture-list, show upload status
646 Avaya G450 CLI Reference
Description
The file name on the TFTP server
The IP address of the TFTP server
g450.cap
copy capture-file
usb, ip-rule (policy, policy-based routing, packet
Possible
Values
on the TFTP server at IP address
ftp, copy capture-file scp,
sniffing), owner,
Packet sniffing
Default
Value
copy
show ip