Show Extension - Avaya G450 Cli Reference Manual

Example
To list the administered DS1 parameters:
G450-001(super-sls)# show ds1 all
Name = 'Willow Steet 2'
DS1 Rate Signaling Channel Connect Interface Side Protocol Ver Bearer Cmpd Ltm
---- ---- --------- ------- ------- --------- ---- -------- --- ------ ---- ---
v4 1544 isdnpri
Name = 'Willow Steet 3'
DS1 Rate Signaling Channel Connect Interface Side Protocol Ver Bearer Cmpd Ltm
---- ---- --------- ------- ------- --------- ---- -------- --- ------ ---- ---
v5 1544 isdnpri
Related Commands
clear ds1, set bearer-capability,
country-protocol,
protocol-version,

show extension

Use the show extension command to display extension-specific SLS data parameters. If no
extension parameters are specified, information for all extensions is displayed.
Note:
It is preferable to use the
Note:
Syntax
show extension list
Parameters
Parameter Description
The extension-specific SLS data parameters to list:
list
seq network
seq network
set bit-rate,
set interface, set interface-companding,
set side, set signaling-mode,
show station
all – Lists all administered extensions
●
extension – Lists only the numbered
●
extension
extension + n – Lists the numbered
●
extension + "n" entries
user a country1
user a country1
set channel-numbering,
set long-timer,
set sls, show sls, sls
command.
SLS survivability
a speech ulaw
a speech ulaw
set connect, set
set name, set
Possible Default
Values Value
all
extension
extension + n
Issue 1 January 2008
no
no
999