Set Type (Dial-Pattern) - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
sls > dial-pattern
Example
To designate the trunk-group number as 99:
G450-001(sls-dial-pattern <dialed-string>)# set tgnum 99
Related Commands
clear dial-pattern, dial-pattern,
max-length, set
dial-pattern, show

set type (dial-pattern)

Use the set type command to administer the type of outbound call in SLS. The SLS
call-engine uses the dial pattern as part of its ARS routing for outbound trunk calls.
Syntax
set type dial-type
Parameters
Parameter
dial-type
958 Avaya G450 CLI Reference
set delete-digits,
min-length, set sls, set type
sls, sls
Description
The dial pattern as part of its ARS routing for outbound
trunk calls.
emer – Emergency call
●
fnpa – 10-digit North American Numbering Plan
●
(NANP) call
hnpa – 7-digit NANP call
●
intl – Public-network international number call
●
iop – International operator call
●
locl – Public-network local number call
●
natl – Non-NANP call
●
op – Operator assisted call
●
svc – Service call
●
set deny, set insert-digits
(dial-pattern), show (dial-pattern),
SLS survivability
(dial-pattern), set
show
Possible Default
Values Value
emer
fnpa
hnpa
intl
iop
locl
natl
op
svc