Avaya G450 Cli Reference Manual page 1038

CLI Commands
Note:
You cannot mix BRI and PRI trunk members within the same trunk group.
Note:
If you attempt to assign more than the maximum number of trunk members, an
error message instructs you to delete a trunk member before you can add a new
one.
A physical trunk port may only be a member of a single trunk group and cannot
be shared across two or more trunk groups.
User Level
read-write
Context
sls > trunk-group
Related Commands
clear tac, clear
channel-preference,
digit-handling,
japan-disconnect,
supervision, set
trunk-group
1038 Avaya G450 CLI Reference
Table 115: G450 SLS digital port assignments
Group type
bri
t1isdn
e1isdn
t1inband
e1inband1
trunk-group, remove port,
set codeset-display,
set digit-treatment, set
set name, set numbering-format,
tac, set trunk-hunt, set
Media Module Maximum ports/
channels
MM720 8
MM722 4
MM710 23 (FAS)
24 (NFAS)
MM710 30 (FAS)
31 (NFAS)
MM710 24
MM710 30
set cbc, set cbc-parameter,
set codeset-national,
incoming-destination,
set send-name,
sls, show (trunk-group),
SLS survivability
set cbc-service-feature,
set dial, set digits,
set incoming-dialtone,
set send-number,
show sls, show trunk-group, sls,
set
set
set
set