Accessing The Quick Setup Procedure - Avaya RADVISION Scopia XT5000 Installation Manual

Installation Guide for Scopia XT Server for IP Office, and Safety Instructions leaflet for Scopia XT Server
for IP Office.
To start using your XT Server, first define basic settings, such as the system's name, language, and
network settings. This is relevant for both new installations, and also after restoring default settings and
re-installing software.
Important:
Your system administrator might already have set these parameters for you and customized certain
features described in this guide to suit the environment of your company. If your administrator set up
password protection, you need the password before continuing with the configuration.
If you are performing the quick setup from the web interface, retrieve the system's IP address, as
described in
You can define these settings as follows:
• Following the quick setup procedure on the XT Server endpoint.
We recommend this method to quickly start using your XT Server, since the quick setup wizard
includes only the basic required settings.
This is only relevant if you connected a monitor to your system, as described in
Monitor to the XT Server
• Remotely defining the settings from the XT Server web interface (see
Interface
Your administrator may define some settings remotely, such as for the network or gatekeeper (see
Configuring Network Settings
interface if you have not already completed the procedure from the endpoint.
If you did not connect a monitor to your system, you can perform the quick setup and configure
your system from the web interface only.
You cannot remotely set the image on the monitor; this must be done from the endpoint itself.

Accessing the Quick Setup Procedure

About this task
Access the quick setup procedure to define basic settings for your Scopia XT Server for IP Office, such
as the system's name, language, and network settings. Follow the tasks of the quick setup procedure in
the order they are presented.
This is relevant for both new installations, and also after restoring default settings and re-installing
software.
You can do this procedure from the endpoint itself or from the XT Server web interface. If you are not
connecting a monitor to the XT Server, you can perform this procedure from the web only.
Before you begin
Your system administrator might already have set these parameters for you and customized certain
features described in this guide to suit the environment of your company. If your administrator set up
password protection, you need the password before continuing with the configuration.
If you are performing the quick setup from the web interface, retrieve the system's IP address, as
described in
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Retrieving the IP Address of the XT Server
on page 25.
on page 34).
on page 76 for details). The quick setup is available from the web
Retrieving the IP Address of the XT Server
on page 29.
Accessing XT Server Web
on page 29.
Connecting a
Initial Configuration | 53