Hcf Tray Empty/Stack Height Sensors - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.8.43 HCF Tray Empty/Stack Height Sensors
Parts List on PL 15.12
Removal
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF (REP 2.7.5).
2. Remove the Tray Empty/Stack Height Sensor
Figure 1 Removing the Sensor(s)
Replacement
1. Reverse the above procedures to replace the Sensor.
Reissue
DocuColor 12/DCCS50
WARNING
(Figure 1).
1. Disconnect the connectors
2. Remove the
Sensor (s)
1/05
8a-27
High Capacity Feeder
REP 2.8.43