Rep 12.5 Stack Height Sensor Assembly - Xerox DocuColor 2240 Service Manual

REP 12.5 Stack Height Sensor Assembly

Parts List on PL 17.6
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
The Stack Height Sensor actuator is fragile and prone to breakage. Use care when working in
this area.
1. Remove the Links from the Top Cover Assembly
1
Open Top Cover
2
Remove the
top Screw
(1 each side)
Figure 1 Detaching the Links from Top Cover Assembly
Initial issue
DC 3535/2240/1632, WC M24
WARNING
CAUTION
(Figure 1).
3
Detach
Links on
both sides
NOTE: It may be necessary to prop the Top Cover open during the next step.
2. Open the Top Cover and remove the Stack Height Sensor Assembly
1
Remove the Screw
Figure 2 Removing Stack Height Sensor Assembly
09/03
4-107
(Figure 2).
2
Disconnect
Connector and
remove sensor
See CAUTION
Repairs and Adjustments
REP 12.5