Feed Actuator Spring - Xerox Phaser 3330 Service Manual

Feed Actuator Spring

Parts List 3.1A Frame (2 of 2)
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section
2. Undock the printer from the optional Tray 2 Base.
3. Remove Tray 1 (page
4. Remove the Duplex Unit
Note: Before performing this step, note where the Feed Actuator Spring hooks into the frame.
5. Remove 2 screws (silver, flanged, tap, 10 mm) and remove the sensor cover.
Xerox Internal Use Only
(page
4-6).
(page 4-7).
4-3).
(page 4-8).
Phaser 3330 and WorkCentre 3335/3345
Service Parts Disassembly
s3320-096
4-93
Service Manual