Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Management > DNS > DNS Name Server Settings, as shown below:
The fields that can be configured are described below:
Parameter
Name Server IPv4
Name Server IPv6
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
DNS Host Settings
This window is used to display and configure the static mapping entry for the host name and the IP address in the host
table.
To view the following window, click Management > DNS > DNS Host Settings, as shown below:
The fields that can be configured are described below:
Parameter
Host Name
IP Address
IPv6 Address
Click the Apply button to accept the changes made.
Click the Clear All button to clear the information entered in all the fields on this page.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IP Source Interface
This window is used to display and configure the IP source interface settings.
Figure 4-583 DNS Name Server Settings Window
Description
Select and enter the IPv4 address of the DNS server.
Select and enter the IPv6 address of the DNS server.
Figure 4-594 DNS Host Settings Window
Description
Enter the host name of the equipment.
Select and enter the IPv4 address of the equipment.
Select and enter the IPv6 address of the equipment.
76
Advertisement
Table of Contents
