Configuring Basic User Environment; Establishing The Configuration Task; Configuring The Password For Switching User Levels - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
The command level is configured. With the command, you can specify the level and view
multiple commands at one time (command-key).
All commands have default command views and levels. You need not reconfigure them.
----End

4.3 Configuring Basic User Environment

This section describes the configuration of the basic user environment for user level switching.

4.3.1 Establishing the Configuration Task

Before configuring the basic user environment, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
The user can log in to a switch with lower level to perform simple configurations or view
configurations. When the configuration is complicated, the user needs to switch to a high level.
Thus, it requires the user to configure the basic environment for switching levels.
Pre-configuration Tasks
Before configuring the basic environment for the user, complete the following task:
l
Data Preparation
To configure the basic environment for the user, you need the following data:
No.
1

4.3.2 Configuring the Password for Switching User Levels

Passwords need to be set for users that are switched from lower levels to higher levels.
Context
When users log in to the switch with a lower user level, they switch to a higher user level to
perform advanced operations by entering the corresponding password. The password needs to
be configured in advance.
Issue 01 (2011-07-15)
Powering on the switch properly
Data
Password for the user level switching
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Basic Configuration
41