Command Manual - System Management
Quidway S2000 Series Ethernet Switches
4.5.4 info-center console channel
Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name. The name can be channel6, channel7,
channel8,
trapbuffer.
Description
Using info-center console channel command, you can configure the channel through
which the log information is output to the console.
By default, Ethernet switches do not output log information to the console.
This command takes effect only after system logging is started.
For the related commands, see info-center enable,display info-center.
Example
# Configure to output log information to the console through channel 0.
[Quidway] info-center console channel 0
4.5.5 info-center enable
Syntax
info-center enable
undo info-center enable
channel9,
console,
Chapter 4 System Maintenance Commands
logbuffer,
loghost,
4-24
monitor,
snmpagent,