Functional Multiplexing Dsp Dma Register B (Func_Mux_Dsp_Dma_B) - Texas Instruments OMAP5910 Reference Manual

Table 54. Functional Multiplexing DSP DMA Register A (FUNC_MUX_DSP_DMA_A)
Field Descriptions (Continued)
Bits Field
9−5 CONF_DSP_DMA_
EVT_02
4−0 CONF_DSP_DMA_
EVT_01

Functional Multiplexing DSP DMA Register B (FUNC_MUX_DSP_DMA_B)

Figure 77. Functional Multiplexing DSP DMA Register B (FUNC_MUX_DSP_DMA_B)
31 30
Reserved
RW-0
23
CONF_DSP_DMA_EVT_11
RW-0x0A
15 14
CONF_DSP_
DMA_EVT_10
RW-0x09
7
CONF_DSP_DMA_EVT_08
RW-0x07
Note: R = Read; W = Write; −n = Value after reset; −x = Value after reset is not defined.
SPRU890A
Value Description
0−27 Configuration bits for DMA event 2. Writing a value n to this
register maps peripheral request source n+1 to DSP DMA event
2. The value n must be between 0 and 27.
0−27 Configuration bits for DMA event 1. Writing a value n to this
register maps peripheral request source n+1 to DSP DMA event
1. The value n must be between 0 and 27.
This global control register (see Figure 77 and Table 55) is a 32-bit read/write
register. Use this OMAP configuration register to set the peripheral request
associated with DMA events 7 through 12.
29
CONF_DSP_DMA_EVT_12
20
CONF_DSP_DMA_EVT_09
RW-0x08
5 4
RW-0x0B
19
CONF_DSP_DMA_EVT_10
RW-0x09
10
CONF_DSP_DMA_EVT_07
RW-0x06
DSP DMA
25 24
CONF_DSP_
DMA_EVT_11
RW-0x0A
16
9 8
CONF_DSP_DMA_
EVT_08
RW-0x07
0
DSP Subsystem 151