Figure 96.
OMAP5910 DSP Subsystem Interrupts
Note:
× − No connection.
SPRU890A
OMAP5910 contains two interrupt controllers for the DSP subsystem:
One DSP level 2 interrupt controller (referred to as DSP interrupt level 2)
-
that can handle 16 interrupts.
One DSP level 1 interrupt controller (referred to as DSP interrupt level 1)
-
that can handle 32 interrupts.
DSP core
OMAP5912 contains three interrupt controllers for the DSP subsystem, see
Figure 97 on the next page:
One DSP level 2.1 interrupt controller (referred to as DSP interrupt level
-
2.1) that can handle 64 interrupts.
One DSP level 2.0 interrupt controller (referred to as DSP interrupt level
-
2.0) that can handle 16 interrupts.
One DSP level 1 interrupt controller that can handle 32 interrupts (DSP).
-
0
3
6
Level 1
interrupt
controller
31
FIQ
DSP Subsystem
DSP Subsystem Interrupts
0
Level 2
interrupt
controller
15
205