System Configuration Flags
The system's overall behavior can be configured by modifying the default values of the System Flags.
Generally, for flag changes (including deletion) to take effect, the MCU must be reset, unless
indicated otherwise.
For information on system reset see
Controlling System Flag Values
In most cases, you may modify a system flag value as described in the procedure below. However, some
of the flags require manual addition, before you can modify their value from their default setting (see
Manually Adding a System
Modifying System Flags
To modify system flags:
1 On the Collaboration Server menu, select Setup > System Configuration.
The System Flags dialog opens.
2 In the MCMS_PARAMETERS_USER
Flags table can be modified.
3 To modify a flag value, select the flag and click Edit Flag, or double-click it.
Polycom®, Inc.
Resetting the Collaboration
Flag).
tab, the
Server.
flags listed in the MCMS_PARAMETERS_USER
758